MAINTENANCE
94 eng
EPA Emissions
EMISSION CERTIFICATION LABEL
An emission certification label, showing emission levels and
engine specifications directly related to emissions, is placed on
the engine at time of manufacture.
a - Idle speed
b - Engine horsepower
c - Piston displacement
d - Date of manufacture
e - Valve clearance (if applicable)
f - Family number
g - Maximum emission output for the engine family
h - Timing specification
i - Recommended spark plug and gap
OWNER RESPONSIBILITY
The owner/operator is required to have routine engine
maintenance performed to maintain emission levels within
prescribed certification standards.
The owner/operator is not to modify the engine in any manner
that would alter the horsepower or allow emissions levels to
exceed their predetermined factory specifications.
SPARK PLUG:
GAP:
EMISSION CONTROL
INFORMATION
THIS ENGINE CONFORMS TO
EMISSION REGULATIONS FOR SPARK IGNITION MARINE ENGINES
CALIFORNIA AND U.S. EPA
REFER TO OWNERS MANUAL FOR REQUIRED MAINTENANCE,
SPECIFICATIONS, AND ADJUSTMENTS
IDLE SPEED (in gear):
FAMILY:
FEL:
TIMING (IN DEGREES):
COLD VALVE
CLEARANCE (mm)
INTAKE:
EXHAUST:
g/kWh
hp
cc
21096
e
d
c
b
a
f
g
h
i
To Next Page
Loading...
Need help?
General
