MAINTENANCE
110 eng
Open the fuse holder and look at the silver colored band inside
the fuse. If band is broken, replace the fuse. Replace fuse with a
new fuse with the same rating.
a - Good fuse
b - Blown fuse
Timing Belt Inspection
Inspect the timing belt and have it replaced by an authorized
dealer if any of the following conditions are found.
• Cracks in the back of the belt or in the base of the belt teeth.
• Excessive wear at the roots of the cogs.
• Rubber portion swollen by oil.
• Belt surfaces roughened.
• Signs of wear on edges or outer surfaces of belt.
To Next Page
Loading...
