MAINTENANCE
eng 113
• Steering Cable Grease Fitting (If equipped) ‑ Rotate
steering wheel to fully retract the steering cable end into
the outboard tilt tube. Lubricate through fitting.
a - Fitting
b - Steering cable end
!
WARNING
Incorrect cable lubrication can cause hydraulic lock, leading
to serious injury or death from loss of boat control.
Completely retract the end of the steering cable before
applying lubricant.
3. Lubricate the following with light weight oil.
• Steering Link Rod Pivot Points ‑ Lubricate pivot points.
To Next Page
Loading...
Need help?
General
