Mercury 30 EFI FourStroke - Page 149

INSTALLATION
eng 139
Assemble steering link rod to engine with bolt, locknut, spacer,
and flat washers. Torque locknut to specifications.
a - Bolt (10‑898101018)
b - Flat washer (12‑95392‑10)
c - Spacer (23‑853826001)
d - Nylon insert locknut (11‑16147‑‑3)
e - Install steering link rod into side hole
f - Nylon insert locknut (11‑16147‑‑3) (tighten until it seats,
then back off 1/4 turn)
Description Nm lb. in. lb. ft.
Nylon insert locknut "d" 27 20
Nylon insert locknut "f"
Tighten until it seats, then back off ¼
turn
a
b
c
b
d
e
b
f
9691