Trailering Boat/Outboard
The best position to trailer your boat is with the outboard tilted down in a
vertical operating position.
If additional ground clearance is required, the outboard should be tilted up
using an accessory outboard support device. Refer to your local dealer for
recommendations. Additional clearance may be required for railroad crossings,
driveways, and trailer bouncing.
IMPORTANT: Do not rely on the power trim/tilt system to maintain proper
ground clearance for trailering. The power trim/tilt system is not intended to
support the outboard during transport trailering.
Shift the outboard into reverse gear. This prevents the propeller from spinning.
TRANSPORTING
eng 21
To Next Page
Loading...
