Section 2 - Getting to Know Your Power Package
90-8M0050539 eng MAY 2011 Page 43
3. Four fuses are located on the port side of the engine. These fuses protect the main power, fuel pump, ignition, and accessory
circuits.
mc77602-1
4. A 20 amp fuse may be located in the ignition switch "I" terminal lead to protect the electrical system. Check for blown fuse if
the ignition key is turned to the "START" position and nothing happens (and circuit breaker is not tripped).
mc70525-1
5. The power trim system is protected from overload by a 110 amp fuse and a 20 amp spade fuse on the power trim pump. The
trim pump may also have an in‑line circuit protection device in the power trim positive lead near the battery switch or battery
connection.
a - 20 amp spade fuse
b - 110 amp fuse
6. The Quicksilver Three‑Button Power Trim Control Panel is further protected by a 20 amp in‑line fuse.
mc70527-1
a
b
9208
To Next Page
Loading...
