Section 9 - Checklists
Page 162 90-8M0050539 eng MAY 2011
Customer Delivery Inspection (CDI)
IMPORTANT: This checklist is for packages that are not equipped with Axius. For engine packages equipped with Axius, use the
Axius‑specific checklist, which appears in Section 5 of the Axius Operation Manual.
Perform these tasks after the Predelivery Inspection (PDI).
This inspection must take place in the presence of the customer.
N/A Completed Item
Operation and maintenance manual—provide and review with customer. Emphasize the importance of safety
warnings and Mercury engine testing procedures.
Approve the external appearance of the product (paint, cowl, decals, etc.)
Warranty—provide and explain the limited warranty to the customer. Explain dealer services.
Explain the optional Mercury Product Protection Plan (North America only)
Operation of equipment—explain and demonstrate:
E‑stop switch / lanyard stop switch operation (all helms)
Cause and effect of steering torque or pull; instruct on using a firm steering grip; explain boat spin‑out and how
to trim for neutral steering.
U.S. Coast Guard capacity plate
Proper seating
Importance of personal flotation devices (PFDs or life vests) and throwable PFDs (throw cushions)
Functions of SmartCraft accessories (if applicable)
Off‑season storage and maintenance schedule
Engine (starting, stopping, shifting, using throttle)
Boat (lights, battery switch location, fuses/breakers)
Trailer (if applicable)
Registration:
Complete and submit warranty registration—provide the customer with a copy.
To Previous Page
Loading...
