Section 4 - Maintenance
Page 76 90-8M0113987 eng DECEMBER 2015
4. Inspect the driveshaft housing‑to‑gear housing ground plate inside the anode cavity for a loose or faulty connection.
Sterndrive anodic plate cavity
a - Ground plate (inside anode cavity)
5. Inspect the gimbal housing ground wires for loose connections, broken connectors, or frayed wiring.
a - Gimbal housing‑to‑gimbal ring ground wire
b - Gimbal housing‑to‑trim cylinder ground wires
6. Inspect the gimbal ring ground wire for loose connections, broken connectors, or frayed wiring.
a - Gimbal ring‑to‑bell housing ground wire
b
a
7006
To Next Page
Loading...
