MAINTENANCE
78 eng
• Tiller handle rubber bushing ‑ lubricate internal diameter.
a - Tiller handle rubber
bushing
• Shift detent ‑ lubricate detent shaft.
a - Shift detent
2. Lubricate the tilt pivot points with lightweight oil.
a - Tilt pivot points
3. Lubricate the following with Quicksilver or Mercury Precision
Lubricants Anti‑Corrosion Grease or 2‑4‑C with PTFE.
Tube
Ref No.
Description Where Used Part No.
94
Anti-Corrosion
Grease
Propeller shaft 92-802867Q 1
To Next Page
Loading...
Need help?
General