Mercury 40 Jet User Manual

OUTBOARD INSTALLATION
107
2. Center the roller with the alignment mark on the cam. Adjust
the cable barrel so that it fits into the anchor pocket.
N
26838
3. Fit the throttle cable through the rubber grommet.
a
b
28701
a - Rubber grommet
b - Throttle cable
4. Place the throttle cable on the throttle lever pin. Lock in place
with the retainer.

Mercury 40 Jet Specifications

General

Cylinders	3
Starting	Electric
Steering	Remote
Shaft Length	20 in
Horsepower	40 HP
Alternator Output	226-watt
Warranty	3 years