Mercury 40 Operator's Manual

MAINTENANCE
57
Tube Ref No. Description Where Used Part No.
94
Anti-Corrosion Grease Propeller shaft 92-802867Q1
95
2-4-C with Teflon Propeller shaft 92-802859Q1
• Propeller Shaft ‑ Refer to Propeller Replacement for removal and installation of the propeller. Coat the
entire propeller shaft with lubricant to prevent the propeller hub from corroding and seizing to the shaft.
ob00378
2. Lubricate the following with Quicksilver or Mercury Precision Lubricants 2‑4‑C with Teflon or Special
Lubricant 101.
Tube Ref No. Description Where Used Part No.
95
2-4-C with Teflon
Tilt support lever, swivel
bracket, tilt tube,
steering cable grease
fitting
92-802859Q1
34
Special Lubricant 101
Tilt support lever, swivel
bracket, tilt tube,
steering cable grease
fitting
92-802865Q1
• Tilt Support Lever ‑ Lubricate through fitting.
• Swivel Bracket ‑ Lubricate through fitting.
a
b
ob00429
a - Tilt support lever b - Swivel bracket
• Tilt Tube ‑ Lubricate through fitting.

Mercury 40 Specifications

General

Horsepower	40 hp
Starting System	Electric
Steering	Remote
Fuel Induction System	EFI (Electronic Fuel Injection)
Shaft Length	20"
Full Throttle RPM Range	6000