Mercury 496 MAG Bravo - Drive Shaft Extension Models

54
CA930
5
71347
71346
4
CB777
Drive Shaft Extension Models
4 Lubricate drive shaft grease fittings, at transom end, by applying approximately 10 - 12 pumps of grease from
a typical hand-operated grease gun using Quicksilver U-joint and Gimbal Bearing Grease.
5 Lubricate drive shaft grease fittings, at engine end, by applying approximately 3 - 4 pumps of grease from
a typical hand-operated grease gun using Quicksilver U-joint and Gimbal Bearing Grease.