EasyManua.ls Logo

Mercury 496 MAG Bravo - Page 60

Mercury 496 MAG Bravo
91 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
58
CB830
Propellers
Bravo Three
77107
4
2
WARNING
Avoid Injury: Remote Control must be in NEUTRAL and ignition key removed from switch before
removing and/or installing propeller.
WARNING
Avoid Injury: Place a block of wood between anti-ventilation plate and propeller to protect hands from
propeller blades and to prevent propeller from rotating when removing propeller nut.
CAUTION
Avoid Injury: Periodically check propeller nut for tightness during boating season.
REMOVAL
1 Place wood block between propeller blades and anti-ventilation plate to prevent rotation.
2 Turn aft propeller shaft nut (1-7/16 in. or 37 mm) counterclockwise to remove nut.
3 Slide propeller and thrust hub off propeller shaft.
4 Turn front propeller shaft nut (2-3/4 in. or 70 mm) counterclockwise to remove nut.
5 Slide propeller and thrust hub off propeller shaft.
REPAIR
Some damaged propellers can be repaired. See your dealer.

Table of Contents

Related product manuals