Lubrication Points
1. Lubricate the following with 2‑4‑C with PTFE or Extreme Grease.
Tube Ref
No.
Description Where Used Part No.
95
2-4-C with PTFE
Copilot, swivel bracket, transom clamp
screws, tiller handle bushing, shift
handle detent
92-802859A 1
Extreme Grease
Copilot, swivel bracket, transom clamp
screws, tiller handle bushing, shift
handle detent
8M0071842
• Copilot ‑ lubricate threads.
• Swivel bracket ‑ lubricate through fittings.
a - Swivel bracket lubrication fittings
b - Copilot
• Transom clamp screws ‑ lubricate threads.
a - Transom clamp screws
NOTE: Lubricating the tiller handle bushing and shift detent shaft requires
disassembly of the product. These points should be lubricated at least once a
year by an authorized dealer.
MAINTENANCE
eng 39
To Next Page
Loading...
