Need help?Do you have a question about the Mercury 71712 and is the answer not in the manual?
General| Brand | Mercury |
|---|---|
| Model | 71712 |
| Category | Remote Control |
| Language | English |
Describes a panel mount ERC for electric steering.
Describes a single-engine console ERC for electric steering.
Describes a dual-engine console ERC without trim.
Describes a dual-engine console ERC with trim.
Describes a premier dual-engine console ERC.
Describes a standard triple-engine console ERC.
Describes a premier triple-engine console ERC.
Describes a standard quad-engine console ERC.
Describes a premier quad-engine console ERC.
Describes an ERC for five or six engines.
Indicates neutral gear position or throttle-only mode.
Adjusts light brightness for ERC and helm components.
Allows increased RPM without shifting into gear.
Reduces steering helm turns for quicker response.
Turns the Active Trim feature ON or OFF.
Changes the selected Active Trim profile.
Indicates the currently selected Active Trim profile.
Shuts off the engine when the operator moves away.
Starts or stops the engine.
Raises and lowers the engine/drive for efficiency.
Allows engine shifting when pressed.
Indicates neutral gear position or throttle-only mode.
Adjusts light brightness for ERC and helm components.
Allows boat control transfer to a different helm.
Allows increased RPM without shifting into gear.
Reduces steering helm turns for quicker response.
Turns the Active Trim feature ON or OFF.
Changes the selected Active Trim profile.
Indicates the currently selected Active Trim profile.
Starts or stops the engine.
Raises and lowers the engine/drive for efficiency.
Allows engine shifting when pressed.
Indicate neutral gear or throttle-only mode.
Adjusts light brightness for ERC and helm components.
Engages single-lever mode for all engines.
Allows boat control transfer to a different helm.
Allows increased RPM without shifting into gear.
Turns the Active Trim feature ON or OFF.
Changes the selected Active Trim profile.
Indicates the currently selected Active Trim profile.
Starts or stops specific engines.
Provides access to supplemental display features.
Starts or stops all engines simultaneously.
Raises and lowers the engine/drive for efficiency.
Displays the current status of the Active Trim feature.
Buttons for display interaction and menu navigation.
Available menu selections like Settings, Alarms, Hours.
Accesses display settings for configuration.
Accesses the list of active alarms.
Accesses the log of past alarms.
Accesses the engine operating hours display.
Configures the number of engines for display.
Assigns a unique address to each helm location.
Notifies the user of trim position changes.
Selects the operating region for the boat.
Sets the display language for the ERC.
Accesses the ERC's wireless network for updates.
Initiates display updates via USB drive.
Displays product name and software version.
Explains the GPS-based automatic trim system.
Details the four operational modes of Active Trim.
Maintains existing trim position at idle.
Tucks the engine for improved time-to-plane.
Trims engine based on GPS speed for efficiency.
Active Trim is overridden by manual trim input.
Turns the Active Trim feature ON or OFF.
Indicates Active Trim system status (normal or error).
Changes the adjustable trim profile.
Shows the currently engaged trim profile.
How Active Trim automatically controls trim.
Active Trim requires a GPS signal to function.
Conditions under which Active Trim resumes.
Operator intervention needed in shallow water.
Setting trim for trailering to prevent engagement.
Guidance on choosing the appropriate trim profile.
Explains the angle between boat bottom and propeller shaft.
Indicates intermittent GPS signal issues.
Indicates unavailable or weak GPS signal.
Indicates a problem with trim system components.
Explains transfer light behavior on single-helm boats.
Steps to initiate and complete helm transfer.
How helm transfer affects autopilot functionality.
Explains throttle/shift for three engines.
Explains LEDs on start/stop buttons.
How to start all engines when none are running.
How to stop all engines when all are running.
How to stop engines when some are running.
Warning against interrupting engine start-up.
To Next Page
