Mercury 75 4-stroke User Manual

–1
90-10225R30
GB
If the outboard motor’s serial number plate contains the CE mark in the lower
left–hand corner, the following statement applies:
This outboard motor manufactured by Mercury Marine, Fond du Lac,
Wisconsin, USA or Marine Power Europe Inc. Park Industrial, de
Petit–Rechain, Belgium complies with the requirements of the following
directives and standards, as amended:
Recreational Craft Directive: 94/25/EC; std ISO 8665,
ISO 11547
Machinery Directive: 98/37/EC
EMC Directives: 89/336/EC; std. EN50081–1,
SAE J551 (CISPR Pub. 12).
EN 50082–1, IEC 61000 PT4–2,
IEC 61000 PT4–3,
Patrick C. Mackey
President, Mercury Marine, Fond du Lac, USA
European Regulations Contact:
Product Environmental Engineering Department, Mercury Marine,
Fond du Lac, WI USA

Mercury 75 4-stroke Specifications

General

Engine Type	4-stroke
Horsepower	75 hp
Cylinders	4
Fuel Induction System	Electronic Fuel Injection (EFI)
Gear Ratio	2.07:1
Starting	Electric
Full Throttle RPM Range	5000-6000 rpm
Steering	Remote
Shaft Length	20" or 25"
Warranty	3 years
Dry Weight	168 kg (370 lbs)