EasyManua.ls Logo

Mercury 75 SEA PRO - User Manual

Mercury 75 SEA PRO
574 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MODELS
75 75 MARATHON 75 SEA PRO
90 100 115 125 65/80 JET
United States 0D283222 and Above. . .
Belgium 09793577 and Above. . . . . . . .
With Serial Numbers
SERVICE
MANUAL
Printed in U.S.A.
1997, Mercury Marine
90-830234R3 DECEMBER 1997

Table of Contents

Questions and Answers

  • E
    elizabeth82Aug 4, 2025
    Why is the DVA reading low on my Mercury Outboard Motor?
    • S
      Scott NewmanAug 5, 2025
      If the DVA reading is low, the stator, adapter module, or switch box may be defective. To isolate the problem, refer to the particular engine model procedure.
  • V
    Vanessa DiazAug 9, 2025
    What does it mean if the DVA is normal after disconnecting the BLUE adapter lead on my Mercury 75 SEA PRO?
    • B
      Brittney ReidAug 9, 2025
      If the DVA reading is normal (190 to 260 volts) after disconnecting the BLUE adapter lead from the switch box and cranking the engine, the switch box is defective.
  • T
    Tracy Holt MDAug 13, 2025
    What does it mean if the DVA is normal after disconnecting the BLUE/WHITE adapter lead on my Mercury 75 SEA PRO Outboard Motor?
    • C
      Cheryl BryanAug 13, 2025
      If the DVA reading is normal (190 to 260 volts) after disconnecting the BLUE/WHITE adapter lead from the switch box and cranking the engine, the switch box is defective.
  • N
    Nicholas GibbsAug 17, 2025
    What to do if DVA readings are still low after cranking the Mercury 75 SEA PRO?
    • T
      Troy RiveraAug 17, 2025
      If DVA readings are still low after cranking the engine, either the stator or the adaptor is defective. Disconnect the GREEN/WHITE and WHITE/GREEN stator leads from the adapter.
  • T
    Thomas BoydAug 22, 2025
    What to do if the DVA reading is still low after cranking the Mercury 75 SEA PRO?
    • M
      mitchellamberAug 22, 2025
      If the DVA reading is still low after cranking the engine, either the stator or the adapter is defective. Disconnect the GREEN/WHITE and WHITE/GREEN stator leads from the adapter.
  • H
    hcameronAug 26, 2025
    What does it mean if resistance between stator leads is normal on a Mercury 75 SEA PRO Outboard Motor?
    • D
      davisdanielAug 26, 2025
      If the resistance between the GREEN/WHITE and WHITE/GREEN stator leads is normal (660 to 710 ohms), the adapter is defective.
  • J
    Jeffrey SmithAug 30, 2025
    What does it mean if resistance between stator leads is incorrect on a Mercury 75 SEA PRO Outboard Motor?
    • S
      samantha20Aug 30, 2025
      If the resistance between the GREEN/WHITE and WHITE/GREEN stator leads is incorrect, the stator is defective.

Mercury 75 SEA PRO Specifications

General IconGeneral
Horsepower75 hp
Fuel SystemElectronic Fuel Injection (EFI)
Starting SystemElectric
Cylinders3
Gear Ratio2.07:1
Warranty3 years
Shaft Length20"
Cooling SystemWater-cooled
Full Throttle RPM Range5000 RPM
Fuel Induction SystemEFI

Related product manuals