
Do you have a question about the Mercury Avator 7.5e and is the answer not in the manual?
| Power Source | Electric |
|---|---|
| Control | Tiller |
| Mounting | Transom |
| Operating Voltage | 48V |
| Power | 750W |
| Engine Type | Electric motor |
| Run Time | Up to 1 hour at full throttle |
| Propeller | 3-blade |
| Warranty | 2 years |
| Shaft Length | Short |
Operator's duties for safe boat operation and occupant safety.
Safety feature preventing outboard activation in gear.
Safety device to stop the engine if the operator is ejected.
Guidelines for safely operating near swimmers and people in water.
Risks and precautions when striking underwater objects.
Critical safety instructions for correctly securing the outboard to the transom.
General advice for safe and enjoyable boating practices.
Critical safety instructions for handling, charging, and storing the battery.
Step-by-step instructions and precautions for charging the battery.
Step-by-step guide for correctly installing the battery into the outboard.
Step-by-step guide for safely removing the battery from the outboard.
Importance of using specified hardware for secure outboard mounting.
Detailed steps for transom mounting, including specifications.
Guidelines and precautions for safely trailering the outboard.
Description of the tiller handle's functions and adjustments.
Location and function of the lanyard stop switch.
Explanation of remote control levers and their functions.
Function of the helm-mounted lanyard stop switch.
How to adjust the outboard's trim position.
Step-by-step guide for raising and lowering the outboard trim.
How the system alerts the operator to problems via sound.
Essential checks before starting the outboard.
Step-by-step guide to prepare for outboard operation.
Procedures for powering the outboard on and off for tiller models.
Procedures for powering the outboard on and off for remote models.
Steps to safely shut down the outboard after use.
Recommended maintenance tasks and checks after use.
Routine checks performed daily to ensure safety and functionality.
Step-by-step guide for removing and installing the propeller.
Possible causes and recommended maintenance for power-up issues.
Potential causes and solutions for intermittent power loss.
Reasons for reduced performance and how to address them.
Common causes for battery not holding charge and solutions.
Troubleshooting steps for battery charging failures.
Critical steps and warnings for outboards that have been submerged.