Daily Check
Check the tightness of the transom clamp bolts (tiller models).
Check the steering system for binding.
Inspect the propellers for damage.
Inspect the battery for damages and proper installation.
Check the state of charge of the battery.
100 Hour Maintenance
(100 Hours or Before Long‑Term Storage)
Dealer
Item
Charge the battery before long‑term storage and charge every six
months.
Verify the condition and status of the battery charger.
Inspect the corrosion control anodes. Refer to Corrosion Control
Anode.
Tiller models only ‑ verify the quick connect feature is operational
and keeps the outboard in place.
Inspect the condition of the outboard lower unit housing paint. Use
the appropriate paint to touch up nicks and scratches.
Inspect the battery connections in the battery compartment and on
the battery for damage, corrosion, or signs of excessive heating.
X
Inspect the outboard mounting hardware for correct torque and
damage.
X
Remote control models only ‑ ensure that the continuity wire
between the transom and outboard is intact and connected to the
transom and outboard securely.
MAINTENANCE
eng 101
To Next Page
Loading...
Need help?
General
