3 Year or 300 Hour Maintenance
Dealer
Item
Remote control models only ‑ inspect the helm and outboard wire
harness connectors.
IMPORTANT:Do not use any version or brand of contact cleaner
on the helm or outboard wire harness. Contact cleaner is harmful to
the seals of the connectors.
X
Inspect the trim feature for damage and ensure that it is working
correctly.
X
Inspect the outboard lower unit isolation mounts for correct torque
and damage.
X
Remove the propeller, check the condition of the propeller shaft,
propeller sheer pin, and apply 2‑4‑C with PTFE to the propeller
shaft where the propeller connects with the shaft. Do not apply
grease to the threads of the shaft.
X
Corrosion Control Anode
The outboard has one corrosion control anode mounted on the underside of
the anti‑ventilation plate (AVP). The anode helps protect the outboard against
galvanic corrosion by sacrificing its metal to be slowly corroded instead of the
outboard metals.
The anode requires periodic inspection, especially in saltwater, which will
accelerate the erosion. To maintain corrosion protection, always replace the
anode before it is completely eroded. Never paint or apply a protective coating
on the anode, this will reduce the effectiveness of the anode.
Anode
MAINTENANCE
102 eng
To Next Page
Loading...
Need help?
General
