Carrying Bag (Optional Accessory)
Trailering for Transportation
TRAILERING FOR TRANSPORTATION - TILLER AND REMOTE
CONTROL MODELS
IMPORTANT:Remote control models must be trailered using the support brace
included with the outboard.
Tiller models ‑ Either remove the outboard from the boat, or use an outboard
support brace. Severe outboard damage, vehicle, trailer damage or complete
loss of the outboard while transporting could result from trailering an outboard
without a outboard support brace.
NOTE:
Remote control models only
‑ the outboard support brace is included
with the outboard. If another outboard support brace or transom saver is used,
follow all instructions included with that product for safe trailering.
Tiller models only
‑ An outboard support brace can be used for transportation.
1.
Remove the battery from the outboard. Refer to Battery Removal.
2. Tiller models only should be transported by using the quick release to
separate the outboard from the transom and placing it either in the towing
vehicle or secured inside the boat.. Refer to Using the Quick Release ‑
Tiller Models Only, and Lifting the Outboard.
TRAILERING FOR TRANSPORTATION USING AN OUTBOARD
SUPPORT BRACE
1. Power off the outboard.
2.
Remove the battery from the outboard. Refer to Battery Removal.
3. Move the trim lock lever to the unlocked position.
TRANSPORTING
eng 61
To Next Page
Loading...
Need help?
General
