21
TACHOMETER CALIBRATION
CAL 1 Tachometer Calibration
VOLT / HOUR SCREEN?
[NO]
[YES]
[SAVE]
Do you want to turn on the split screen
that displays battery voltage and engine
run time?
SPEED / SEA TEMP SCREEN?
[NO]
[YES]
[SAVE]
Do you want to turn on the split screen
that displays the temperature of the wa-
ter and the speed of the vessel?
SEA TEMP
OFFSET = 0°?
[DOWN]
[UP]
[SAVE]
This screen allows you to calibrate the
display and the water temperature sen-
sor?
[NO]
[YES]
[SAVE]
DEPTH SCREEN?
Do you want to turn on the depth screen?
(Remember: You must have a Smart
Craft depth transducer connected to the
system for this screen to operate.)
SIMULATOR MODE?
[NO]
[YES]
[SAVE]
Do you want to turn on a simulation
mode? (used for demonstration
purposes).
EXIT?
[NO]
[CAL2]
[SAVE]
CALIBRATION 1
Do you want to exit calibration? Or go to
calibration 2?
To Next Page
Loading...
