23
TACHOMETER CALIBRATION
CAL 2 Tachometer Calibration
FUEL TANK CAPACITY
[DOWN]
[UP]
[SAVE]
Lets you enter the capacity of your
boats fuel tank. This option is the same
for tank 1 as it is for tank 2.
CALIBRATION FUEL TANK
[EDIT]
[SKIP]
Lets you enter the mode where you can
calibrate your fuel tank. Fuel tank
calibration procedure is the same for
tank 1 as it is for tank 2.
EMPTY TANK THEN
PRESS PLUS BUTTON
[DFLT]
[SAVE]
[SKIP]
You can choose to have an empty tank
and hit SAVE, or hit DFLT and a default
value will be entered based on the
capacity of the tank.
FILL TO 1/4 THEN
PRESS PLUS BUTTON
[DFLT]
[SAVE]
[SKIP]
You can choose to have tank at 1/4
and hit SAVE, or hit DFLT and a default
value will be entered based on the ca-
pacity of the tank.
FILL TO 1/2 THEN
PRESS PLUS BUTTON
[DFLT]
[SAVE]
[SKIP]
You can choose to have tank at 1/2
and hit SAVE, or hit DFLT and a default
value will be entered based on the ca-
pacity of the tank.
FILL TO 3/4 THEN
PRESS PLUS BUTTON
[DFLT]
[SAVE]
[SKIP]
You can choose to have tank at 3/4
and hit SAVE, or hit DFLT and a default
value will be entered based on the ca-
pacity of the tank.
[DFLT]
[SAVE]
[SKIP]
FILL TO FULL THEN
PRESS PLUS BUTTON
You can choose to have tank at full
and hit SAVE, or hit DFLT and a default
value will be entered based on the ca-
pacity of the tank.
(continued on next page)
To Next Page
Loading...
