Mercury Alpha

130
72032
7
72029
8
71966
6
CD679
6 Trim Cylinder Anodes - are mounted on each trim cylinder. To
replace the trim cylinder anodes:
A Remove two screws from anode.
B Clean mounting surfaces down to bare metal for proper contact.
C Install new anode. Tighten screws securely.
CA969
7 Bearing Carrier Anode (Alpha and Bravo One) - is located in
front of the propeller, between the front side of the propeller and the
gear housing. Refer to Propeller section in this manual for propeller
removal and installation. To replace the propeller anode:
A Remove propeller.
B Remove two screws from anode.
C Clean mounting surfaces down to bare metal for proper contact.