159
5 Fully open the water supply and allow it to run for 10 minutes.
6 Turn off the water supply.
7 Disconnect the water hose adapter from the blue drain hose and
the water hose.
8 Pull T-handle until the quick connect fittings on the blue drain
hoses are within reach.
9 Install quick connect fittings on the bracket. Pull on the hoses to
ensure they are firmly connected.
10Push down on handle and move into the slot on the bracket.
IMPORTANT: The next time the engine is started, visually
inspect that the blue drain hoses are connected and not leaking.
To Next Page
Loading...
