EasyManua.ls Logo

Mercury Jet 65 - Filling Oil Injection System

Mercury Jet 65
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FUEL AND OIL
20
GASOLINE/OIL MIXING RATIO CHART
Gas/Oil Ratio 3.8 liters (1 gal.) gas 11.5 liters (3 gal.) gas 23 liters (6 gal.) gas
50:1 (2%) 89 ml (3 fl. oz.) oil 237 ml (8 fl. oz.) oil 473 ml (16 fl. oz.) oil
MIXING GASOLINE AND OIL
Portable Tank - Pour 4 liters (1 gallon) of gasoline into tank. Add the correct amount of oil and mix thoroughly. Add
the remainder of gasoline.
Build-in Tank - Using a funnel, pour the correct amount of oil slowly with the gasoline as tank is filled.
Filling Oil Injection System
1. Place the outboard in a vertical operating position. Remove cowl cap.
ob01599
2. Remove oil filler cap and pull out dipstick.
2890
3. Use the dipstick to check oil level.
2891
4. Hook the dipstick on the tank during filling.

Table of Contents

Related product manuals