Mercury Jet 65 - Checking Power Trim Fluid; Submerged Outboard

MAINTENANCE
51
2901
Checking Power Trim Fluid
1. Tilt outboard to the full up position and engage the tilt support lever.
ob00687
2. Remove fill cap and check fluid level. The fluid level should be even with the bottom of the fill hole. Add
Quicksilver or Mercury Precision Lubricants Power Trim & Steering Fluid. If not available, use automotive
(ATF) automatic transmission fluid.
ob01663
Submerged Outboard
A submerged outboard will require service within a few hours by an authorized dealer once the outboard is
recovered from the water. This immediate attention by a servicing dealer is necessary once the engine is exposed
to the atmosphere to minimize internal corrosion damage to the engine.