HURTH V-DRIVE TRANSMISSION
SERVICE MANUAL NUMBER 23
90-861326--1 MARCH 1999 Page 8D-3
Tools
Description Specification
Thermometer [(3/8 In, Thread 0-270°F
(-18 to -132°C)]
Obtain Locally
Pressure Gauge (M10x1 Thread)
Lubricants/Sealants
Description Specification
Quicksilver Engine Coupler Spline Grease 92-816391A4
Quicksilver Liquid Neoprene 92-25711--3
ATF Dexron lll
Loctite Type A Obtain Locally
Loctite 515
Capacity
Model U.S. Qt. (L)
Hurth 630V 5 (4.7)
Always use dipstick to determine exact quantity of fluid required.
Rotation
The Hurth transmission is a “full power reversing” transmission, allowing a standard (LH
rotation) engine to be used for both rotations. Propeller rotation is determined by shift cable
attachment at the remote control.
CAUTION
Avoid severe transmission damage. All Hurth Transmissions require Standard
Left-Hand rotation engines. NEVER connect a Hurth Transmission to a Right-Hand
rotation engine.
Downloaded from https://needmanual.com/!
To Next Page
Loading...
Need help?
General