Mercury OptiMax 250 - Exhaust System Installation; General Exhaust System Notes; Exhaust Outlet Measurement Procedure

DIRECT FUEL INJECTION
Page 3B-34
90-888438 JUNE 2002
7. If fuel hoses were removed, secure hoses with proper full circle clamp using tool
91-803146T (or Snap-On equivalent YA3080) to crimp clamps. Use stainless screw
clamp on vapor separator vent hose and inlet fuel hose to fuel lift pump.
a
59415
b
a
59409
a
a
a-Full Circle Clamp
b-Stainless Screw Clamp