28
Advanced BIOS Setup Option
This option defines advanced information about your system.
Phoenix – AwardBIOS CMOS Setup Utility
Advanced BIOS Setup
Item Help
CPU Feature [Press Enter]
CPU L1 & L2 Cache [Enabled]
CPU Hyper-Threading [Enabled]
Quick Power On Self Test [Enabled]
First Boot Device [Floppy]
Second Boot Device [HDD-0]
Third Boot Device [CDROM]
Boot Other Device [Enabled]
Swap Floppy Drive [Disabled]
Boot Up Floppy Seek [Disabled]
Boot Up NumLock Status [On]
Gate A20 Option [Fast]
ATA 66/100 Cable MSG [Enabled]
Typematic Rate Setting [Disabled]
x Typematic Rate (Chars/Sec) 6
x Typematic Delay (Msec) 250
Security Option [Setup]
APIC Mode [Enabled]
OS Select For DRAM > 64MB [Non-OS2]
HDD S.M.A.R.T Capability [Disabled]
Menu Level
Allows you to choose
the VIRUS warning
feature for IDE Hard
Disk boot sector
protection. If this
function is enabled
and someone attempts
to write data into this
area, BIOS will show a
warning message on
screen and alarm beep
↑
↓
→
←
: Move Enter : Select +/-/PU/PD:Value: F10: Save ESC: Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
CPU Feature (Press Enter)
Scroll to this item and press <Enter> to view the following screen, and the
following items are only available when the motherboard supports Prescott
CPU:
Phoenix – AwardBIOS CMOS Setup Utility
CPU Feature
Item Help
Delay Prior to Thermal [16 Min]
Thermal Management [Thermal Monitor 1]
Limit CPUID MaxVal [Disabled]
Menu Level
Thermal Monitor 1 (On die
throtting)
Thermal Monitor 2 Ratio &
VID transition
↑
↓
→
←
: Move Enter : Select +/-/PU/PD:Value: F10: Save ESC: Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Delay Prior to Thermal (16 Min)
Enables you to set the delay time before the CPU enters auto thermal mode.
To Next Page
Loading...
Need help?
General
