40
standard VGA cards. This board includes a built-in VGA system that does not
require palette snooping so you must leave this item disabled.
Assign IRQ For USB (Enabled)
Names the interrupt request (IRQ) line assigned to the USB on your system.
Activity of the selected IRQ always awakens the system.
INT Pin1~8 Assignment (Auto)
Names the interrupt request (IRQ) line assigned to a device connected to the
PCI interface on your system.
PC Health Status Option
On motherboards that support hardware monitoring, this item lets you monitor
the parameters for critical voltages, critical temperatures, and fan speeds.
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
PC Health Status
Item Help
Shutdown Temperature [Disabled]
CPU Warning Temperature [Disabled]
CPU Temp.
CAS FAN Speed
CPU FAN Speed
CPU Vcore
Menu Level
↑ ↓ → ← : Move Enter : Select +/-/PU/PD:Value: F10: Save ESC: Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Shutdown Temperature
Enables you to set the maximum temperature the system can reach before
powering down.
CPU Warning Temperature
Use this item to set the warning temperature level for the processor.
System Component Characteristics
These fields provide you with information about the systems current operating
status. You cannot make changes to these fields.
• CPU Temperature
• CAS FAN Speed
• CPU FAN Speed
• CPU Vcore
To Next Page
Loading...
Need help?
General
