INFLATING THE BOAT
a - Air valve
b - Air hose adapter
1. Inflate the side air chambers before inflating the keel air chamber. Inflate
the air chambers as follows:
NOTE: Install the removable seat before the boat is fully inflated. Insert the
flanges in the PVC slide glued on each top of the tube.
a. Install the floorboards (slates, aluminum, air deck) into the boat. Refer
to Floorboard Installation section.
b. Unscrew the valve caps by turning a quarter of a turn
counterclockwise.
c. Ensure that the valve stems are in the closed position.
d. Insert the air hose adapter into the air valve.
OPERATION
eng 33
To Next Page
Loading...
Need help?
General