Deflating
IMPORTANT: When deflating the side air chambers, do not deflate one side air
chamber at a time. When deflating, maintain a balanced air pressure between
air chambers to prevent stress or potential damage to the inside diaphragms
that separate the air chambers.
a - Valve stem
b - Closed position
c - Open position
d - Valve cap
1. Remove the valve cap—turn it a quarter‑turn counterclockwise.
2. Push the valve stem in and deflate the front air chamber a quarter of the
way.
3. Push the valve stems in on the side air chambers and release the air
pressure a quarter of the way.
4. Repeat this procedure to evenly deflate all of the air chambers.
5. Push in the valve stem and turn the stem a quarter turn clockwise to lock
the valve in the open position.
6. Use the hand pump in the deflate mode to remove the remaining air.
MAINTENANCE
44 eng
To Next Page
Loading...
