a. Insert and lock the hose into the pump handle port marked
"DEFLATE."
a - Hose
b - Deflate port
b. Insert and lock the air pump fill adapter into the air chamber valve.
Folding Instructions
1. Deflate the boat following the deflating instructions. Keep the air valves
open.
2. Remove the seat (if equipped), paddles, floorboards and any equipment.
3. Fold the deflated sides inward until the sides meet in the middle.
4. Fold the boat transom inward and then fold in the two rear cones inward
over the transom.
MAINTENANCE
eng 45
To Next Page
Loading...
Need help?
General