Section 2 - Initial Screens and Setup Wizard
Page 42 90-8M0109374 eng JUNE 2016
Use the on‑screen keypad to enter the capacity. When finished entering tank capacity data, select OK to close the keypad.
The tank position will populate the name field. To change the name of the tank, select the field and use the on‑screen keypad
to customize the tank name.
After entering a tank name, select Enter on the keyboard to continue to the next tank row in the Tank Setup screen. When all
tank customization data has been entered, select the Refresh button in the lower corner. Check all data fields for accuracy, and
select Next to continue with the Setup wizard.
To Next Page
Loading...
Need help?
General
