Need help?Do you have a question about the Mercury VesselView 502 and is the answer not in the manual?
General| Display Size | 5 inches |
|---|---|
| Display Type | LCD |
| Touchscreen | Yes |
| Waterproof Rating | IPX7 |
| Connectivity | NMEA 2000, Bluetooth |
| Engine Monitoring | Yes |
| GPS Integration | Yes |
| Fuel Management | Yes |
| Operating Voltage | 12V DC |
| Power Supply | 12V DC |
| Operating Temperature | -15°C to 55°C |
| Compatibility | Mercury engines with SmartCraft |
| Mounting Options | Flush |
Confirms product compliance with EU R&TTE directive and technical regulations.
Introduces VesselView, its compatibility, system components, and functionality.
Explains VesselView Link integration with Simrad/Lowrance units and its features.
Guides on updating VesselView software via Wi-Fi or Micro SD card.
Procedure for upgrading VesselView software using a Micro SD card.
Steps to update the VesselView Link Module software through the VesselView unit.
Guides the user through initial VesselView configuration steps.
Configuration of engine type, model, and number of engines.
Selection of the speed data source: GPS, pitot, or paddle wheel.
Setting up data sources by detecting and selecting network devices.
Optimizing engine trim and speed for best fuel economy using ECO mode.
Managing boat acceleration and target speed for watersports launch profiles.
Setting and maintaining a specific vessel speed or engine RPM.
Accessing and making changes to the VesselView setup wizard.
Configuring tank types, capacities, and performing tank calibration.
Selecting the speed sensor or sender (GPS, pitot, paddle wheel) for data.
Activating autopilot features like Cruise, Troll, Smart Tow, and ECO Mode.
Displays Mercury warnings, faults, and alarms with action descriptions.
To Next Page