Section 1 - Getting Started
Page 26 90-8M0109374 eng JUNE 2016
A progress bar will be displayed, showing the operator that the process is taking place. After completing the calibration, the
display will return to the Advanced Settings menu.
Start‑up
On start‑up with the power on and engines off, after the splash screen and advisory screen sequence, the main display will load
and all data and graphics will be active.
Upon engine start‑up, the VesselView will perform a systems check. All engine systems will be queried for current operational
data. The systems check appears visually on the screen between the speed and/or RPM sweeps.
To Next Page
Loading...
