Section 4 - Setup and Calibrations
Page 82 90-8M0109374 eng JUNE 2016
Steering Offset is used to align the outboard, sterndrive, or inboard to zero degrees. When the drive is positioned perpendicular
to the hull, the steering angle displayed on‑screen may not match the steering sensor on the drive. To adjust for this variance,
select the Offset window. The Steering Angle Calibration box appears. Selecting the Calibrated row Zero button will apply the
offset. Note that the offset does not change on the display screen until the Save button is selected.
Vessel Control
Vessel Control settings allows the operator to activate the availability of the autopilot features.
To Next Page
Loading...
