Section 4 - Setup and Calibrations
Page 86 90-8M0109374 eng JUNE 2016
Engines shown is covered during the Setup Wizard process, but display options can be changed in the Engines settings menu
at any time. VesselView can display up to four engines, depending on the number of engines chosen during the Setup Wizard
process. The operator can select which engines are displayed. Checking or unchecking the engine selection will determine
which engines are displayed on the VesselView.
Engine Model
Engine model selection allows the user to change power package descriptions. Engine models is covered during the Setup
Wizard, but changes can be made anytime. Any changes made here may make other settings and display options unavailable
in VesselView.
To Next Page
Loading...
