Section 4 - Setup and Calibrations
90-8M0109374 eng JUNE 2016 Page 77
When tank calibration is complete, select Save and the unit will return to the navigation screen.
Speed
Speed settings allow the operator to select the type of sensor or sender that the VesselView will receive speed data from.
Speed settings can be configured using this menu.
Speed source has the option of choosing a GPS and the GPS source, the CAN P or the CAN H network. A strategy using a
pitot sensor and/or a paddle wheel can also be selected. Selecting the pitot or paddle wheel options brings up a selection of
sources.
To Next Page
Loading...
