05
Chapter 2 Connect the Extender to the Internet
3) The extender will scan and display all available 2.4 GHz networks. Select your
router's 2.4 GHz host network and enter the password to connect.
Note:
If the network you want to extend is on but not listed, please try the following steps.
• Move the extender closer to your router, and click Rescan.
• Click Other to manually enter the SSID (network name) and password of the network you want to extend.
4) Select your router's 5 GHz host network and enter the password to connect.
To Next Page
Loading...
