28
Chapter 5 Use Your Extender as an Access Point
LED Status Indication (For Range Extender Mode)
Signal
O Power is o.
Blinking
green
The extender is starting, upgrading, or performing
WPS connection.
Blinking
Orange*
The extender is ready for setup.
Blinking
red
WPS connection failed.
Solid
green
Both 2.4 GHz and 5 GHz Wi-Fi bands are working well.
Solid
orange
Either 2.4 GHz or 5 GHz Wi-Fi band is disabled.
Solid red Both 2.4 GHz and 5 GHz Wi-Fi bands are disabled.
*Earlier models do not have this LED status. The LED shows solid red instead.
To Next Page
Loading...
