Chapter 6: Plumbing 459 Motoryacht • Owner’s Manual
50
Autofloat Switches
• Each automatic bilge pump features an
autofloat switch.
• The autofloat switch turns the pump On when water
rises above a preset level.
• Each autofloat switch is normally located next to the
bilge pump it controls.
• The autofloat switches should be tested often.
Testing the autofloat switches
1. Twist either of the white plastic knobs one quarter
turn to lift the float and turn On the bilge pump.
2. If the pump does not turn On, check the inline fuse.
3. If the fuse is good but the switch doesn’t work, it
may indicate a bad switch or possibly a low battery.
AUTOFLOAT
KNOBS
SWITCH
To Next Page
Loading...
