Using the multimedia controller
13
For example, to record a TV programme
press Copy until the display shows:
C TV
The TV sound and picture will now be fed to the audio and video
tape outputs respectively.
You can then select another source, such as CD, without
affecting the recording.
Recording a source
You can copy the audio and video components of a source to
the audio and video tape outputs, independently of the source
you are listening to.
To copy a source
● Press Copy.
Each time you press Copy the multimedia controller will step
between the following options:
Display Option
CSrc
Copy Source. The current source is
fed to the audio/video tape outputs.
CAtt
Copy Attenuate. The audio outputs
are muted.
C CD
Copies the first source to the audio
and video tape outputs.
C RD
Steps through each source in turn,
etc.
To Next Page
