Meridian 562V.2 - Adjusting the Volume and Changing the Display

Using the multimedia controller
12
Adjusting the volume and changing the display
The 562V Multimedia Controller is not normally configured to
provide an internal volume control. However, you can control the
system volume from the front panel as described in this section.
To change the volume
● Press A or V (front panel), or the red A or V keys on the
remote.
As you adjust the volume setting the display will show the
current volume level.
For example:
CD55
To mute the sound
● Press Mute.
The display will show:
Mute
To restore the sound
● Press Mute again.
Alternatively the sound will be restored if you adjust the volume.
To change the display
● Press Display.
Each time you press Display the display will step between the
following options:
Display option Example
Source and volume.
This is the usual display.
RD65
Source only (full label).
Rad
Blank.