Setting up the multimedia controller
20
Analogue connections
The analogue connections should be made using high-quality
screened cable, taking care to connect the left and right
channels correctly.
Video inputs
The following table gives details of the video inputs:
Use this input To connect to this
VCR1/V1, VCR2/V2, Composite video signals, using phono
LD/V3, CABLE/V4, connectors.
TV/V5, V6
S1/VCR1, S2/VCR2, S-video signals, using miniDIN
S3/DVD, S4 connectors.
Video outputs
The following table gives details of the video outputs:
Use this output To connect to this
MAIN OUT Compositor video input on a TV or
monitor, using a phono connector.
VCR1 OUT, Composite video recorder inputs, using
VCR2 OUT phono connectors.
MAIN S OUTPUT S-video input on a TV or monitor, using
a miniDIN connector.
VCR1 or VCR2 S-video video recorder inputs, using
S OUTPUTS miniDIN connectors.
To Next Page
