22
System Specifications
• Features
o Wall mount, 304 SST construction, NEMA 4X electronics enclosure
o Designed for high-use areas (4-5 people per minute)
o CIP model
o Washes up to Mid-Forearm
o Optional Integrated Air Curtain Dryer (500EZ-A)
• Dimensions
o 18 1/8” width x 19 5/8” depth x 28 ¾” height
o 46 cm width x 50 cm depth x 73 cm height
• Weight
o 76 lbs. (34.5 Kg) – varies with options
• Shipping Weight
o 93 lbs. (42.2 Kg) – varies with options
• Cycle Activation
o Handwash – Automatic via infrared photo optical sensor
o Master & optional re-settable compliance monitor
• Electrical
o 100 - 240 VAC 50/60 Hz, 160 Watts – Intl. plugs available
• Solutions Level
o Solutions level LED light bar indicator / “ULTRAPURE SOL. EMPTY” display notification
• Water Consumption
o 0.6 gallon (2.3 L) per handwash cycle
• Plumbing
o 2 – ¾” male garden hose fitting, hot & cold minimum 4 (15 LPM) GPM flow
o 40 - 100 PSI (2.8 - 6.9 Bar), 50 PSI (3.6 Bar) optimum water pressure
▪ Note: Consult Meritech if connecting more than 2 system on the same water lines
• Drain
o Standard 1 1/2” (40 mm) drain stub, P-Trap to be supplied by facility
o Ideal wall drain height from floor is 18” (45.7 cm)
• Compressed air for Optional Integrated Air Curtain Dryer
o 3/8” (9.5 mm) inside diameter supply line recommended., 19 CFM at 25-30 PSI (1.7 - 2.0 Bar) for
optimal performance. Not to exceed 50 PSI (3.6 Bar). Pressure regulator not supplied. Must be
installed external to station.
• Maintenance
o Daily, Weekly, & Quarterly (see maintenance section of this manual)
o As needed (see maintenance section of this manual or contact Meritech for assistance)
• Protective Modes
o Solutions level indication
o Solutions empty notification
o Current limited motor
• Solutions Storage
o 1 – 2 ½ (10L) gallon container hand hygiene solution
• Hand Solution
o Required solutions provided by Meritech
Solutions provided or approved by Meritech (Other solutions may void warranty)
To Next Page
