Cleaning and disinfection
● Use a damp cloth and mild, non-abrasive cleanser to clean the plastic and metal parts
of your powerbase wheelchair.
Avoid using products that may scratch the surface of your powerbase wheelchair.
● If necessary, clean your product with an approved disinfectant. Make sure the
disinfectant is safe for use on your product before application.
● Follow all safety instructions for the proper use of the disinfectant and cleaning agent
before applying it to your product. Failure to comply may result in skin irritation or
premature deterioration of upholstery and/or scooter finishes.
Battery terminal connections
● Make certain that the terminal connections remain tight and uncorroded.
● The batteries must sit flat in the battery wells.
ABS plastic shrouds
● The Main Shroud is are formed from durable ABS plastic and is coated with an
advanced formula urethane paint.
● A light application of car wax will help the shrouds retain their high gloss.
Motor brushes
The motor brushes are housed inside of the motor transaxle/assembly. They should be
inspected periodically for wear by your authorized dealer.
AXLE BEARINGS AND THE MOTOR/TRANSAXLE ASSEMBLY
You do not need to lubricate these items, as they are all prefabricated and sealed.
33
Care and Maintenance
To Next Page
Loading...
