Wiring harnesses
● Regularly check all wiring connections.
● Regularly check all wiring insulation, including the charger power cord, for wear or
damage.
● Have your authorized dealer repair or replace any damaged connector, connection, or
insulation that you find before using your powerbase wheelchair again.
● Even though the powerbase wheelchair has passed the necessary testing
requirements for ingress of liquids, you should keep electrical connections away from
sources of dampness, including direct exposure to water or bodily fluids and
incontinence. Check electrical components frequently for signs of corrosion and replace
as necessary.
Nylon lock nut replacement
Any nylon insert lock nut removed during the periodic maintenance, assembly, or
disassembly of the scooter must be replaced with a new nut. Nylon insert lock nuts should
not be reused as it may cause damage to the nylon insert, resulting in a less secure fit.
Replacement nylon insert lock nuts are available at local hardware stores or through your
dealer.
37
Care and Maintenance
To Next Page
Loading...
