Console, charger, and electronic controller module
● Keep these areas away from moisture.
● Before operating your powerbase wheelchair, allow any of these areas to dry
thoroughly if they have been exposed to moisture.
Fuses
To replace a fuse:
1. Remove the fuse by pulling it straight out of its slot.
2. Examine the fuse to be sure it is blown.
3. Insert a new fuse of the proper rating.
Storing your powerbase wheelchair
If you plan on not using your powerbase wheelchair for an extended period of time, it is
best to:
1. Fully charge its batteries prior to storage.
2. Disconnect the batteries from the powerbase wheelchair.
3. Store your powerbase wheelchair in a warm, dry environment.
4. Avoid storing your powerbase wheelchair where it will be exposed to temperature
extremes.
Always protect batteries from freezing temperatures and never charge a frozen battery.
Charging a frozen battery can result in damage to the battery.
Recycle
Information on the recycling of used batteries and other parts of the powerbase
wheelchair; use only special recycling for the powerbase wheelchair parts, no general
disposal (e.g. batteries, electronics)
38
Care and Maintenance
To Next Page
Loading...
